GASGAS MC 250F, r.v. 2025
KTM IGNITION CURVE SWITCH CMPL.
2 892 Kč
Plug & Play mounting Attachment to handlebar Activate traction control and quick shift for the two different engine configurations
KTM SPANNER WRENCH
728 Kč
Practical tool for setting preload on the shock absorber without having to remove it.
KTM BRAKE DISC FRONT 270MM
3 864 Kč
Floating Inner ring anodised Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added bra...
KTM AIR FILTER BOX LID
485 Kč
Protects the intake system against water and dirt when cleaning the air filter box
KTM LOCK-ON GRIP SET
800 Kč
Right grip permanently glued to the throttle grip Left grip with aluminum clamping ring for fixing on the handlebar Inconvenient gluing and secur...
KTM AIR FILTER DUST PROTECTION COVER
387 Kč
Acts as an additional protective layer Recommended for extremely dusty conditions Premature sanding of the air filter is avoided Coarse-pored air...
KTM PLUG 22-42MM
242 Kč
Keeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
KTM IGNITION CURVE SWITCH CMPL.
2 892 KčPlug & Play mounting Attachment to handlebar Activate traction control and quick shift for the two different engine configurations
KTM SPANNER WRENCH
728 KčPractical tool for setting preload on the shock absorber without having to remove it.
KTM BRAKE DISC FRONT 270MM
3 864 KčFloating Inner ring anodised Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added bra...
KTM AIR FILTER BOX LID
485 KčProtects the intake system against water and dirt when cleaning the air filter box
KTM LOCK-ON GRIP SET
800 KčRight grip permanently glued to the throttle grip Left grip with aluminum clamping ring for fixing on the handlebar Inconvenient gluing and secur...
KTM AIR FILTER DUST PROTECTION COVER
387 KčActs as an additional protective layer Recommended for extremely dusty conditions Premature sanding of the air filter is avoided Coarse-pored air...
KTM PLUG 22-42MM
242 KčKeeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
KTM PISTON RING COMPRESSOR CPL. 03
Tool for tensioning piston rings when installing the piston in the cylinder
KTM SLIDE-IN PISTON PIN RETAINER
Tool for installing the piston ring lock in the piston
KTM VALVE SPRING LEVER
Tool for installing and removing valves and valve springs
KTM LIMIT PLUG GAUGE F.VALVE GUIDE
Tool for checking valve guides
KTM INSERT FOR VALVE SPRING LEVER
Tool for installing and removing valves and valve springs
KTM HOLDING TOOL CHASSIS LC4
Tool for pressing components in and out (bearing rings when changing steering head bearing)
KTM MOUNT.TOOL STEER.HEAD BEAR.LC4
Tool for pressing components in (bearing rings when changing steering head bearing)
KTM MULTI-TOOTH WRENCH SOCKET LONG D32
Tool for removing and installing components (crankshaft nut)
KTM DE-MOUNT.TOOL ADAPTER BUSHING
Tool for driving components out (collar bushings)
KTM MOUNTING AID GASKETSTR.
Tool for protecting components (thread of piston rod)
KTM SPECIALSOCKET FOR AIR FORK
Tool for loosening and tightening components (screw cap)
KTM MOUNTING SLEEVE MAIN PISTON
Tool for mounting components (piston rod in the air cartridge)
KTM CONNECTOR BLOCK D 38MM
Tool for clamping components (air cartridge)
KTM MOUNTING TOOL
Tool for removing and pressing in components (pilot bushing)
KTM VENTILATION & FILLING DEVICE
Tool for bleeding and filling dampers
KTM MOUNT. SLEEVE
Tool for mounting components (seal ring retainer on piston rod)
KTM FILLING ADAPTER ''A''
Adapter for the vacuum pump, for filling and bleeding the damper
KTM SCREW LOCKING
Medium strength thread lock - contents, 50 ml. Temperature resistant from -55 to +200 °C Fills gaps...
KTM REPAIR KIT 56 G
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated har...
KTM LOCTITE 243 BLUE 5 ML
Medium-strength thread lock. Suitable for all metal thread connections.
KTM CLAMPING BLOCK INNER/OUT. PIPE
Inner/outer pipe clamp suitable for D=43 mm fork.
KTM RETAIN. ARM F. ENG.WORK STAND CPL.
Tool for fixing the removed motor to the engine assembly stand.
KTM STAND/FORK SUPPORT
Plug-in stand and fork support in one part Two tools in one Saves space when transporting your motor...
KTM FILLING ADAPTER
Adapter for filling tool for filling the damper with nitrogen
KTM DCC NUT LINK 23 / PDS 24
Tool for loosening and tightening components (compression adjustment)
KTM FMF POWERCORE 4 SILENCER
Made of the highest quality materials Significantly more performance Improved torque curve ATTENTION...
