GASGAS MC 65, r.v. 2022
KTM FUEL FILTER
713 Kč
Prevents dust and dirt from entering the tank when the fuel tank cap is opened Filter is attached directly to the tank opening Fits all 3/4 fuel ...
KTM PLUG 22-42MM
242 Kč
Keeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
KTM MAGNETIC BOLT PAN, BLACK
606 Kč
Magnetic. Never lose a bolt again! Perfect for use in combination with the SX stand.
KTM FEELER GAUGE
485 Kč
100 mm length 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95...
KTM PIN TENSIONER ADJUSTABLE D#4
581 Kč
Tool for working on the piston rod (spring holder sheet, preload adjuster)
KTM CHAIN 1/2X1/4''
728 Kč
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability
KTM FUEL FILTER
713 KčPrevents dust and dirt from entering the tank when the fuel tank cap is opened Filter is attached directly to the tank opening Fits all 3/4 fuel ...
KTM PLUG 22-42MM
242 KčKeeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
KTM MAGNETIC BOLT PAN, BLACK
606 KčMagnetic. Never lose a bolt again! Perfect for use in combination with the SX stand.
KTM FEELER GAUGE
485 Kč100 mm length 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95...
KTM PIN TENSIONER ADJUSTABLE D#4
581 KčTool for working on the piston rod (spring holder sheet, preload adjuster)
KTM CHAIN 1/2X1/4''
728 KčSpecially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability
KTM SPRING HOOK
Comfortable unhooking of springs Convenient and easy to use Easy handling and operation
KTM NITROGEN FILLING DEVICE CPL.
Tool for filling the damper with nitrogen
KTM PRELOAD STEEL 3612
Tool for tensioning and releasing the springs
KTM ASSEMBLY TOOL GASKET RING
Tool for mounting components (seal ring retainer on piston rod)
KTM DIS-LASSEMBLY TOOL
Tool for mounting and pressing out components (dirt scraper, DU bush)
KTM ASSEMBLY TOOL KGW
Tool for pressing in components (heim joint)
KTM DE-MOUNT.TOOL KGW SWIVEL BEAR.
Tool for pressing in components (heim joint)
KTM CLAMPING BLOCK F. PIPE 48/60
Tool for clamping components (fork legs, outer fork tube)
KTM CABLEPLUG OUTPINSET
Pinout kit including case and crimping pliers for repairing wiring harnesses or replacing the most c...
KTM BRAKE BLEEDER
Tool for servicing hydraulic brake systems
KTM BRAKE BLEEDER COVER
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
KTM BRAKE BLEEDER COVER
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
KTM UNIVERSAL MOUNTING RACK
Tool (including chassis, crank rotation mechanism, oil pan, and engine bracket) for mounting the rem...
KTM SUPPORT ENGINE BASE CPL.
Tool for securing the removed engine on the engine work stand
KTM RETAIN. ARM F. ENG. WORK STAND
Tool for securing the removed engine on the engine work stand
KTM CLUTCH HOLDER
Tool for holding components (clutch,rotor)
KTM SPOKE TORK KEY
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
KTM ADJUSTING PLATE 65 SX 2003
Tool for checking the X dimension (piston protrusion) and the ignition setting
KTM HOUSING SEPARATING TOOL CPL.
Tool for disengaging components (sections of the engine case)
KTM MAGNETIC PULLER M 27X1 KOKUSAN
Tool for pulling off components (rotor)
KTM PROTECTION CAP CRANKSHAFT
Tool for protecting components (when disengaging the sections of the engine case)
KTM SPARK PLUG WRENCH 16MM 1/2INCH
Tool for removing and installing spark plugs
KTM GROUND PLATE
Anchor plate for screwing on to the pressing tool, for pressing the crankshaft together
KTM PRESS OUT PLATE CRANKSHAFT
Tool for separating the crankshaft
KTM MOUNTING TOOL
Tool for loosening and tightening components (screw cap)
KTM DE-MOUNT.TOOL ADAPTER BUSHING
Tool for driving components out (collar bushings)
