NÁSTROJE PRO ODPRUŽENÍ
PIN KEY 4681/3612
Tool for removing and installing components (seal ring retainer or locking cap)
TOOL KGW PIVOT BEARING
Tool for pressing in components (heim joint)
RESERVOIR CAP MOUNT./DE-
Tool for removing and installing components (reservoir)
DE/MOUNTING TOOL RES.PIPE
Tool for mounting and removing components (damper cartridge)
BUSHING DE/MOUNT PIPE D=52
Tool for removing and pressing in components (piston of preload adjuster)
GUID. BUSHING DISM./MOUNT.
Tool for pressing in components (DU bush in seal ring retainer)
NITROGEN FILL DEVICE 2005
Tool for filling the damper with nitrogen
PRELOAD STEEL 3612
Tool for tensioning and releasing the springs
ASSEMBLY TOOL GASKET RING
Tool for mounting components (seal ring retainer on piston rod)
CLAMPING BLOCK 4054
Tool for clamping components (outer tube, fork leg)
DE-MOUNT. TOOL PIPE BUSH. D=54
Tool for removing and installing components (damper cartridge)
CLAMP BLOCK PISTON ROD D=18/10
Tool for clamping components (fluid barrier needle)
DIS-LASSEMBLY TOOL
Tool for mounting and pressing out components (dirt scraper, DU bush)
DE-MOUNT.TOOL KGW SWIVEL BEAR.
Tool for pressing in components (heim joint)
PISTON FIXATION
Tool for centering components (plunger of piston rod)
DE-MOUNT.TOOL ADAPTER BUSHING
Tool for pressing in components (seal ring retainer of piston rod)
CLAMPING BLOCK F. PIPE 48/60
Tool for clamping components (fork legs, outer fork tube)
UNITYPE TOOL INNER PIPE
Tool for removing and installing the inside fork tube
SPRING MOUNT./DISMANT.
Special tool for spring removal/fitting, suitable for 3612, 4681 and PDS suspension strut.
BREATHER PISTON D=46
Bleed piston D=46 mm, suitable for 4681 suspension struts.
VACUUM PUMP OIL , 1 LITRE
Vacuum oil for vacuum/pressure pump T1240S available in 1 liter containers.
BREATHER BOTTLE
Bleed bottle, suitable for 3612, 4681 and PDS suspension struts.
CALIB. MAIN BUSHING D=14
Calibrating central mounting bush D=14 mm, suitable for 3612 and 4681 suspension struts.
TESTBED. TOOL DAMPER
Test rig tool, suitable for 3612 BAEM suspension strut.
BREATHER PISTON D=36
Bleed piston D=36 mm, suitable for 3612 BAVP suspension strut.
